Aimed at companies in all their applications, the Clamper Professional Product Line, Devices for Protection Against Electrical Surges (DPS), has the quality recognized by large customers in the most diverse segments such as: telecommunications, electronics for measurement, entertainment and consumption , IT, industrial automation, energy, signaling, banking and medical systems.
CLAMPER MODULES FOR GENERAL DEALERS
Surge Protection Devices, pluggable into compact terminal blocks for protection of telephone exchanges, PABX and KS (CPA), high-speed data transmission equipment, cables and carriers.
MP-R (G) and (S)
Module for connection to the network and protection against overvoltages, overcurrents and overheating with self-regenerative series protection for connection in blocks type C-303 (5 pins).
Mains connection module and protection against overvoltages, overcurrents and overheating with self-regenerative serial protection for connection in quick connection blocks (LSAPlus)TERMINALS
LOW VOLTAGE AIR
Low voltage lightning rods for secondary distribution network to protect the grid itself, the transformers connected to it, consumer appliances and other systems against electrical surges.
PRBT-RDS 280V 10KA/C and PRBT-RDS 440V 10KA/C
Low voltage polymeric lightning rod, with Zinc Oxide Varistor (MOV) technology for installation in conventional network (bare cables).
PRBT-RDS 280V 10KA/I
Low voltage polymeric lightning rod, with Zinc Oxide Varistor (MOV) technology for installation in an isolated network (sheathed cables).
VCL SLIM (IEC)
single-pole SPD, used in alternating or direct current circuits, normally installed between phase and neutral in electrical power distribution panels with European standard circuit breakers (IEC). Equipped with bi-connection screw terminals, suitable for receiving copper cables or bars and a mechanical identification of the operating state.
CLAMPER FRONT GUARD Very
high-capacity and precision protection devices against electrical spikes for electrical energy input from Telecommunications Sites, Data Processing Centers (DPC), hospitals and other places where the continuity of supply of the system to be protected is essential . They are 2-stage hybrid SPDs (SAD and MOV) and / or only with MOV technologies, in two-phase and / or three-phase power systems, with metal box for external installation and equipped with local signaling for each module and auxiliary contact for service signaling remote. There are models with different peak current intensity capabilities (72 to 492 KA, with 8/20 us waveform).
Protection devices against electrical surges in transmission lines.
722.B.004 and 722.B.004 FASTER
DPS with 1 stage (722.B.004) or hybrid with 2 protection stages (722.B.004 FASTER), for 2 conductors (phase / phase or phase / neutral ) power supply with connection through terminals and maximum current of 4 AMU.
722.P.010 and 722.P.010 FASTER
DPS with 1 stage (722.P.010) or hybrid with 2 protection stages (722.P.010 FASTER), connectable to a socket (2P + T phase / neutral / earth or phase / phase / earth) with a maximum current of 10 A.
Protection devices against electrical surges in telecommunications and data lines.
PROTECTION FOR PHONE / DATA LINES
Protection for telephone exchanges, PABX, digital modems (ADSL, HDSL, MSDSL), ISDN, rural telephones, single-channel and multi-access radios and rural fixed cellular radios, among others.
822.B.020 and 822.B.130
2-stage hybrid DPS for data line type 1 LPCD and / or standard RS-422-A and RS-485 (822.B.130) interface with connection via terminals.
823.B.020 and 823.B.130
3-stage hybrid DPS, for 1 data line type LPCD (823.B.020) or 1 telephone line type LD (823.B.130) with connection via terminals.
SERIAL CABLE PROTECTION
Protection for multiserial boards, microcomputer boards, printers, repeaters, concentrators, CPUs, modems, terminals, MUX, telephone exchanges, billing centers, among others.
831.D.20 and 832.D.20
1-stage DPS (831.D.020) or 2-stage hybrid (832.D.020) for 3 conductors, for interface data lines, standard RS-422- A and RS-485, with connection through type D microconnectors.
841.D.20 and 842.D.20
1-stage (841.D.020) or 2-stage hybrid (842.D.020) DPS for 4 conductors on RS-422-A and RS interface data lines -485 standard, with connection through micro DB connectors- 9
ETHERNET NETWORK PROTECTION
Protection for server network cards, microcomputers, printers, Hub, Patch panels, PLC interface cards, among others.
1-stage DPS for standard ETHERNET 100 Base T data lines with connection via an RJ 45 connector and Plug device.
ONLINE COAXIAL PROTECTION
Protection for video equipment (CCTV), microcomputer and server network cards, HUB, Patch panels, radio equipment, concentrators, rural fixed cellular telephony radios, single and multi-access radios, link multiplexer cards. 2 Mbits, equipment transmitters and / or receivers in general.
DPS for coaxial cables with BNC type connectors (female / female) with protection for the live conductor and for the shield with respect to ground.
Electrical Surge Protection Devices for instrumentation and control lines, for protection of alternating and direct current sources, analog and digital PLC interface cards, electronic scale load sensors, including bottles, sensors, flowmeter interfaces and transducers.
922.B.010 FASTER (S900.PE.001)
High precision SPD spike, small dimension, 2-stage hybrid, for 2 signal conductors and/or power supply.
Combined protector for electrical network and telephone line (fax, telephones, cordless, etc).